Recovery Challenges For Tech Businesses After Floods

Flooding can be devastating no matter your business, but tech businesses are in a precarious situation where the damage can happen a lot faster. It just takes a small splash or a day of heavy humidity to completely ruin electronics, and you can't recover by simply wiping everything down. Here are a few concerns to keep in mind as a tech company trying to recover from flood damage, and a few ways that flood damage repair professionals can help:

Salvaging And Testing Water-Compromised Systems

If your computer systems are in a flooded room or are completely submerged, the most important thing to do is remove everything and avoid turning on a single device. Water damage isn't guaranteed from splashing the systems with water or even being soaked for a little while, but turning on an even slightly damp computer can ruin everything worse than being submerged.

For electronics, the first flood damage issue is corrosion. There are a few metal contacts, wires, and connectors that can corrode or rust to the point of either breaking or providing an inaccurate current, and data transfers that make your computers work are all about exact currents.

You'll need to dry off the systems, but this task can be dangerous if not handled by a professional. Static shock is a risk, so anti-static soaking and dabbing materials will need to be used. If the devices have been soaked for too long, the resin-based circuit boards could begin to separate, which will make the devices crumble and even burn if activated.

Testing should only be done once you can ensure that every component is dry. Flood damage repair professionals can work on making your data center, tech work center, and offices a more dry and secure area while helping you get your technology to a safe place.

You don't want to return computers and other electronics to their proper place until restoration work is done. Any left behind moisture or mold in an untreated area can lead to slow corrosion and cooling problems as wet dust clogs up the systems.

Component-Level Recovery

Drying needs to be done at the component level, not just the entire system at once. For computers, the motherboard needs to be taken out and all attached components separated to allow drying. Memory modules are probably the easiest to dry, while processors can be removed and carefully dried since there aren't many hiding spots for water between the pins and on the top.

Storage drives are the tricky part. Humidity could have gotten into the sealed drive case, and the circuit board on the bottom of the drive could have water underneath. Flood damage repair professionals can help you by either placing the drives in a dehumidifier area or working with a data recovery partner to make sure that the drives are activated safely.

The data is usually the most important part, so pull the hard drives/solid state drives as soon as possible. Even if everything else is damaged, your data can be recovered as long as you can get the drive to safety in time.

Contact a flood damage repair professional to discuss both building and tech restoration, and to get referrals when the more complex flood damage problems arise. Contact a company like All Care for more information and assistance. 


Share